You Are Here:  Home | Garage Door Opener Remote Transmitters / Receivers | Genie

Genie ACSCTG Type 3 Garage Door Opener Remote Intellicode, 3 Button #GIT-3 / ACSCTG Type 3

Price: $29.95   Quantity:

GENIE Garage Door Opener  Remote Intellicode GIT-3 or ACSCTG Type 3 Three button garage door opener  remote transmitter  with rolling code frequency. Program with easy-to-use 'Learn Code' button on receiver.    3-button remote control comes with programming instructions.   For programming instructions on this site, visit the Support/Assistance section.   Model number printed on transmitter case is ACSCTG Type 3.   This takes the place of the GIC90-3, or ACSGT type garage door openers remote transmitters, no longer made.   See our programming page Garage Door Opener Programming Instructions  for details on programming Intellicode remote transmitters.   Also, see Things to Consider, below, for simple instructions.

Things to Consider When Installing this Product:

Programming Instructions: Press the Receiver Learn Code button on the power head receiver of your Genie garage door opener. This small, black, unmarked button is located behind the light lens at the motor head and is nearest the floppy 6 inch antenna wire that protrudes from the motor head. When pressed, a radio signal indicator light will start blinking red for 30 seconds. After pressing the Learn Code Button, press your transmitter button twice for your system to grab the frequency and code it in. (Keep the transmitter you want tuned at least 2 feet away from the power head while tuning.) Press the transmitter button once more to test the system and start your door moving.

Web Design & Web Hosting Services by The Karcher Group