GENIE Remote Transmitter Digital 9 or 12 Code Switches
- GENIE Remote Transmitter Digital 9 or 12 Code Switches
- GT912
Frequency 390 MHz. Can be used with 9 or 12 code switch setting garage door remote transmitters having 390 MHz. Comes with programming instructions. Battery and visor clip included. For programming instructions see Things to Consider When Installing this Product, below. Replaces Genie AT85 remote transmitter, no longer made.
Note: Canada was using a different frequency (315 MHz) for the GT90, GT912 and GT90-3 type remotes. See GT912C for Canada. Starting approximately 5 years ago Genie switched to the 390 MHz frequency shown on the present units. Check your remote for the correct frequency for your garage door opener.
-
Order Securely Price: $29.95
-
Additional Information:
For setting this remote to a receiver with 9 set switches, slide the wide switch, to the far right, up. Follow the top 9 numbers only in matching to the radio receiver. For a receiver with 12 switches, slide the wide switch on the far right down, and use the bottom 12 numbered switches to match the settings with the radio receivers switches.

-
Compatibility Questions?
Often times manufacturers have multiple part numbers for the same product. To eliminate some of the confusion, see the list below to confirm that this product will work for you.
This product replaces these parts:- GPT90-1
- GT90
- MAT90
- CT90
- ODT90-1
- AT85
- AT85A
- AT90
- AT95
- GPT90
- GT90
- MAT85
- SEE FAQ SECTION ABOVE OUR PH # FOR MORE INFO.
You may also find these products useful:
- GENIE Keyless Entry Wireless GPWK-12 / GWK-BL
- GPWK-12 / GWK
- Price: $39.95


- 9-volt Duracell Battery
- MN1604
- Price: $2.99


- GENIE Case Only for AT90 or GT912
- 20341A
- Price: $9.95


- Aero Brand Lubricant for GENIE Screw
- LUBRIPLATE 10
- Price: $4.94



0 item(s)
Garage door openers, parts & service since 1964