GENIE Remote Transmitter Digital 3-Button

NO-ICON!

GENIE Remote Transmitter Digital 3-Button

GPT90-3

GENIE GPT90-3 or GT90-3

Can be used with Genie garage door remotes having 390 frequency and either 9 or 12 code setting switches.   Comes with programming instructions.   Battery and visor clip included.   For programming instructions on this site, refer to the Support/Assistance section.    Replaces  AT95 and AT85 remote transmitters, no longer made.       See Things to Consider When Installing this Product, below, for programming instructions.

Note:   Canada  was using a different frequency (315 MHz) for the GT90, GT912 and GT90-3 type remotes.   Starting approximately 5 years ago Genie switched to the 390 MHz frequency shown on the present units.   Check your remote for the correct frequency for your garage door opener.

Quantity:

Order Securely Price: $29.95

Additional Information:

Things to Consider When Installing this Product:

Note the number of Security Code Switches on radio receiver on the ceiling in garage. Slide Right Function Switch to match this number (up for 12, down for 9). Slide Security Code Switches on or off to match radio receiver code switches. Slide Left Function Switch to SET. Press desired Control Button on remote once, then slide Left Function Switch to RUN and test Control Button for operation of door. Follow same procedure for other two Control Buttons.

 

 

 

 

Compatibility Questions?

Often times manufacturers have multiple part numbers for the same product. To eliminate some of the confusion, see the list below to confirm that this product will work for you.

This product replaces these parts:

• AT90
• AT95
• AT85