GENIE Carriage Screw Drive Excelerator

NO-ICON!

GENIE Carriage Screw Drive Excelerator

36179R.S/25589S

GENIE Carriage Screw Drive 36179R.S/25589S

Genie screw drive carriage. Works with all Genie screw drive models made since 1970.    This carriage has an embedded magnet in its frame to trip the excelerator magnetic limits.    Otherwise, it is exactly the same model as the 25589S and will work for any screw drive unit that takes the 25589S carriage.   The  old part number, 34107R.S,  has changed to 36179R.S    See Things to Consider When Installing this Product, below, for installation instructions.

Does not work with the old models 400 and 401, made in the 1960's and early 70's.

Quantity:

Order Securely Price: $17.95

Additional Information:

Things to Consider When Installing this Product:

To install carriage, remove the door arm from the existing carriage. Remove the nuts to the bolts on the screw drive rail to the front header bracket and slide the rail off to one side, giving room for the old carriage to be removed by sliding it off the end of the rail. Slide the new carriage onto the rail and replace the rail on the header bracket bolts and secure. Reinstall the door arm and engage the new carriage. Adjust limits, if necessary.

Other Things to Consider

This carriage is universal for all Genie Screw Drive models, except the first models 400 and 401, both made in the 1960's.