Genie Remote IC

1. 1
2. 2
3. 3

NO-ICON!

Genie Remote IC

ACSCTG Type 2 / GIT

Genie garage door opener remote Intellicode Transmitter.  Known as both ACSCTG Type 2 and as GIT-2 Genie remote.   The new model now shows TBSTG Type 2 and the box says G2T-2.   This is the new Genie Intellicode (rolling code) two button remote transmitter.   This remote takes the place of the older GIC90-2 (ACSGT) model remotes.   Compatible with OCDT type code dodger remotes.   These models have an FCC ID: B8Q315390T, which replaces the FCC ID: B8QACSCT.   They work as a dual frequency remote, sending both 390MHz and 315MHz frequencies.  Remote comes with battery, visor clip, and instructions.   Program using learn button on garage door openers motor head.   See programming page Garage Door Opener Programming Instructions  for details, or see Things to Consider, below, for simple programming instructions.

Quantity:

Order Securely Price: $29.95

Additional Information:

Things to Consider When Installing this Product:

Programming Instructions: Press the Receiver Learn Code button on the power head receiver of your Genie garage door opener. This small, black, unmarked button is located behind the light lens at the motor head and is nearest the floppy 6 inch antenna wire that protrudes from the motor head. When pressed, a radio signal indicator light will start blinking red for 30 seconds. After pressing the Learn Code Button, press your transmitter button twice for your system to grab the frequency and code it in. (Keep the transmitter you want tuned at least 2 feet away from the power head while tuning.) Press the transmitter button once more to test the system and start your door moving.

Compatibility Questions?

Often times manufacturers have multiple part numbers for the same product. To eliminate some of the confusion, see the list below to confirm that this product will work for you.

This product replaces these parts:

• GIC90-2
• GIC90-1
• GMIC-3BL
• GMIC90-3
• GIC90-1
• GIC90-3
• GMIC-2
• OCDT-2